{"id":150,"date":"2019-02-04T16:49:26","date_gmt":"2019-02-04T07:49:26","guid":{"rendered":"http:\/\/150.60.207.74\/?page_id=150"},"modified":"2020-10-15T15:46:45","modified_gmt":"2020-10-15T06:46:45","slug":"xylene","status":"publish","type":"page","link":"https:\/\/fudow.co.jp\/en\/products\/xylene","title":{"rendered":"Xylene resin"},"content":{"rendered":"
\r\n
\r\n

Xylene resin<\/h2>\r\n<\/div>\r\n<\/div>\r\n\r\n
\r\n\r\n

Xylene resin<\/h2>\r\n\r\n
\r\n
<\/div>\r\n
    \r\n
  • Straight types: Formed by bridged methylene linkage or ether linkage<\/li>\r\n
  • Modified types: Modified by phenols, polyhydric alcohols, or other<\/li>\r\n<\/ul>\r\n<\/div>\r\n\r\n

    [Improved features]<\/p>\r\n

      \r\n
    • Control viscosity of various resins (decrease or increase), Good compatibility with various resins<\/li>\r\n
    • Initial adhesion, Tackiness and Stickiness<\/li>\r\n
    • Flexibility<\/li>\r\n
    • Water, Moisture, Alkali, and Gasolin resistance<\/li>\r\n
    • Dielectric property and electric insulation<\/li>\r\n<\/ul>\r\n\r\n

      [Target resins]<\/p>\r\n

        \r\n
      • Epoxy resin, phenol resin, acrylic resin, unsaturated polyester resin, urethane resin, various rubbers (NR\/CR\/NBR, SBR, SIS, SBS, EPDM, etc.), chlorinated polyethylene, alkyd resin, etc.<\/li>\r\n<\/ul>\r\n\r\n

        Straight type<\/h2>\r\n

        The basic structure of Straight type is a multimer composition formed by m-xylene by methylene linkage or ether linkage and a part of the edge is an OH-group (OH value: 20 to 40 mgKOH\/g). Therefore, Straight type is excellent in compatibility with many synthetic resins and is used for improvement in performance of various resins.<\/p>\r\n\r\n

        <\/div>\r\n\r\n

        a. Low-viscosity xylene resin<\/h3>\r\n

        This is an environment-compatible modifier that is not a substance prohibited by VOC. This is the best suited as a modifier for various resins e.g. epoxy resin, phenol resin, unsaturated polyester resin, acrylic resin, urethane resin, and alkyd resin.<\/p>\r\n\r\n\r\n \r\n \r\n \r\n \r\n
        Grade<\/td>\r\n Viscosity (mPa\u2022s\/25\u00b0C)<\/td>\r\n Specific gravity (20\u00b0C)<\/td>\r\n OH value (mgKOH\/g)<\/td>\r\n <\/tr>\r\n
        Y-50<\/td>\r\n 50<\/td>\r\n 1.019<\/td>\r\n 20<\/td>\r\n <\/tr>\r\n
        Y-100<\/td>\r\n 100<\/td>\r\n 1.029<\/td>\r\n 25<\/td>\r\n <\/tr>\r\n
        The above are not product specifications.<\/td>\r\n <\/tr>\r\n<\/table>\r\n\r\n\r\n

        [Additional features]<\/p>\r\n

        \r\n
        Epoxy resin coating<\/dt>\r\n
        Flexibility, Leveling, Wettability, Mositure and Water resistance<\/dd>\r\n<\/dl>\r\n\r\n

        b. Environment-friendly xylene resin<\/h3>\r\n\r\n

        Y-300 features lower TVOC and lower heating loss in comparison with Y-50 and Y-100, and can be expected to be utilized for epoxy resin, acrylic resin as a modifier that has a low environmental burden because it discharges a small amount of outgas when it heated.<\/p>\r\n\r\n\r\n \r\n \r\n \r\n
        Grade<\/td>\r\n Viscosity (mPa\u2022s\/25\u00b0C)<\/td>\r\n Specific gravity ( 20\u00b0C)<\/td>\r\n OH Value (mgKOH\/g)<\/td>\r\n Refractive index<\/td>\r\n <\/tr>\r\n
        Y-300<\/td>\r\n 300<\/td>\r\n 1.024<\/td>\r\n 20<\/td>\r\n 1.56<\/td>\r\n <\/tr>\r\n
        The above are not product specifications.<\/td>\r\n <\/tr>\r\n<\/table>\r\n\r\n

        [Additional features]<\/p>\r\n

        \r\n
        UV-curing coating\/adhesive<\/dt>\r\n
        Adhesion, Flexibility, Moisture and Water resistance, Compatibility<\/dd>\r\n
        Epoxy resin coating<\/dt>\r\n
        Leveling, Adhesion, Flexibility, Moisture and Water resistance, Control viscosity<\/dd>\r\n<\/dl>\r\n\r\n

        c. Middle- to High-viscosity xylene resin<\/h3>\r\n

        It can be used as a tackifier for adhesive and pressure sensitive adhesive and also as a modified material for phenol resin and unsaturated polyester resin.<\/p>\r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
        Grade<\/td>\r\n Viscosity (mPa\u2022s) \/ (\u00b0C)<\/td>\r\n Specific gravity (20\u00b0C)<\/td>\r\n OH Value (mgKOH\/g)<\/td>\r\n <\/tr>\r\n
        Y-1000<\/td>\r\n 1,000 \/ 25<\/td>\r\n 1.045<\/td>\r\n 21<\/td>\r\n <\/tr>\r\n
        LLL<\/td>\r\n 2,500 \/ 25<\/td>\r\n 1.023<\/td>\r\n 36<\/td>\r\n <\/tr>\r\n
        LL<\/td>\r\n 4,700 \/ 25<\/td>\r\n 1.073<\/td>\r\n 40<\/td>\r\n <\/tr>\r\n
        L<\/td>\r\n 12,600 \/ 25<\/td>\r\n 1.059<\/td>\r\n 32<\/td>\r\n <\/tr>\r\n
        H<\/td>\r\n 630 \/ 75<\/td>\r\n 1.074<\/td>\r\n 33<\/td>\r\n <\/tr>\r\n
        G<\/td>\r\n 993 \/ 75<\/td>\r\n 1.107<\/td>\r\n 36<\/td>\r\n <\/tr>\r\n
        H-80\uff0a<\/td>\r\n 200 \/ 20<\/td>\r\n 1.025<\/td>\r\n 29<\/td>\r\n <\/tr>\r\n
        The above are not product specifications.<\/td>\r\n <\/tr>\r\n<\/table>\r\n

        \uff0aH-80 : Resin 80% toluene solution.<\/p>\r\n\r\n

        [Additional features]<\/p>\r\n

        \r\n
        Acrylic resin pressure sensitive adhesive<\/dt>\r\n
        Flexibility, Adhesion, Water resistance, Compatibility<\/dd>\r\n
        Epoxy resin coating \/ adheve<\/dt>\r\n
        Adhesion, Leveling, Flexibility, Moisture and Water resistance, Control viscosity<\/dd>\r\n
        Rubber compound<\/dt>\r\n
        Flexibility, Damping, Tackiness, Spill prevention of plasticizer and mineral oil<\/dd>\r\n
        Modified materials (phenol resin, unsaturated polyester resin)<\/dt>\r\n
        Flexibility, Water, Moisture and Abrasion resistance<\/dd>\r\n<\/dl>\r\n\r\n

        Modified types<\/h2>\r\n

        Modified types are capable to improve properties more than straight types, because they are obtained by reaction with other compounds such as phenols, carboxylic acids, alcohol and so on. Modified types can be used in a wide range of applications.<\/p>\r\n\r\n

        a. Alkyl phenol modified Types<\/h3>\r\n

        This is solid xylene resin modified by alkyl phenol. We offer grade with a wide range of softening points.<\/p>\r\n\r\n

        <\/div>\r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
        Grade<\/td>\r\n Appearance<\/td>\r\n Gardner color<\/td>\r\n Softening point (\u00b0C)<\/td>\r\n <\/tr>\r\n
        GHP-150<\/td>\r\n Light brown flake<\/td>\r\n \uff1c12<\/td>\r\n 150 – 160<\/td>\r\n <\/tr>\r\n
        HP-120<\/td>\r\n \uff1c10<\/td>\r\n 125 – 135<\/td>\r\n <\/tr>\r\n
        HP-100<\/td>\r\n \uff1c8<\/td>\r\n 105 – 125<\/td>\r\n <\/tr>\r\n
        HP-210<\/td>\r\n \uff1c10<\/td>\r\n 90 – 110<\/td>\r\n <\/tr>\r\n
        HP-70<\/td>\r\n \uff1c8<\/td>\r\n 70 – 90<\/td>\r\n <\/tr>\r\n
        The above are not product specifications.<\/td>\r\n <\/tr>\r\n<\/table>\r\n\r\n

        [Additional features]<\/p>\r\n

        \r\n
        Various inks<\/dt>\r\n
        Adhesion, Inorganic filler \/ pigment dispersion, Gloss, Leafing property<\/dd>\r\n\r\n
        Coating<\/dt>\r\n
        Adhesion, Leveling, Corrosion resistance<\/dd>\r\n\r\n
        Urethane adhesive<\/dt>\r\n
        Adhesion, Moisture, Heat and Alkali resistance<\/dd>\r\n\r\n
        Acrylic adhesive<\/dt>\r\n
        Cohesion, Adhesion<\/dd>\r\n\r\n
        Rubber adhesive<\/dt>\r\n
        Adhesion, Water resistance, Tackiness<\/dd>\r\n\r\n
        Rubber compound<\/dt>\r\n
        Damping, Procsssibility, Tackiness<\/dd>\r\n<\/dl>\r\n\r\n

        b. Novolac types<\/h3>\r\n

        This is novolac type xylene resin modified by phenol resin.<\/p>\r\n\r\n

        <\/div>\r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
        Grade<\/td>\r\n Hexamine (phr)<\/td>\r\n Appearance<\/td>\r\n Melting point (\u00b0C)<\/td>\r\n Gelation time (sec. \/ 150\u00b0C)<\/td>\r\n <\/tr>\r\n
        NP-100<\/td>\r\n 10<\/td>\r\n Light brown powder<\/td>\r\n 65 – 85<\/td>\r\n 100 – 200<\/td>\r\n <\/tr>\r\n
        GP-212<\/td>\r\n 12<\/td>\r\n 60 – 80<\/td>\r\n 100 – 350<\/td>\r\n <\/tr>\r\n
        P-100<\/td>\r\n –<\/td>\r\n Light brown flake<\/td>\r\n 70<\/td>\r\n Not hardened<\/td>\r\n <\/tr>\r\n
        GP-200<\/td>\r\n –<\/td>\r\n 70<\/td>\r\n Not hardened<\/td>\r\n <\/tr>\r\n
        The above are not product specifications.<\/td>\r\n <\/tr>\r\n<\/table>\r\n\r\n\r\n \r\n \r\n \r\n
        Grade<\/td>\r\n Solvent<\/td>\r\n Appearance<\/td>\r\n Viscosity (mPa\u2022s\/30\u00b0C)<\/td>\r\n Gelation time (sec. \/ 150\u00b0C)<\/td>\r\n <\/tr>\r\n
        HP-30<\/td>\r\n Methanol<\/td>\r\n Brown varnish<\/td>\r\n 250 – 550<\/td>\r\n Not hardened<\/td>\r\n <\/tr>\r\n
        The above are not product specifications.<\/td>\r\n <\/tr>\r\n<\/table>\r\n\r\n\r\n

        [Additional features]<\/p>\r\n

        \r\n
        Binder for friction material<\/dt>\r\n
        Heat, Water and Abrasion resistance<\/dd>\r\n\r\n
        Binder for carbon resistant membrane<\/dt>\r\n
        Moisture resistance and Electrical insulation<\/dd>\r\n\r\n
        Reinforcement of rubber<\/dt>\r\n
        Moisture and Oil resistance, Tackiness<\/dd>\r\n\r\n
        PVC sol sealant<\/dt>\r\n
        Moisture and Heat resistance, Adhesion<\/dd>\r\n\r\n
        Molding compounds<\/dt>\r\n
        Heat and Moisture resistance, Electrical insulation<\/dd>\r\n<\/dl>\r\n\r\n

        c. Resol types<\/h3>\r\n

        This is resol type xylene resin modified by phenol resin.<\/p>\r\n\r\n

        <\/div>\r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n
        Grade<\/td>\r\n Solvent<\/td>\r\n Appearance<\/td>\r\n Viscosity (mPa\u2022s\/20\u00b0C)<\/td>\r\n Gelation time (sec. \/ 150\u00b0C)<\/td>\r\n <\/tr>\r\n
        PR-1440M<\/td>\r\n Methanol<\/td>\r\n Clear brown<\/td>\r\n 50 – 200<\/td>\r\n 75<\/td>\r\n <\/tr>\r\n
        PR-1440<\/td>\r\n n-butanol\/ xylene<\/td>\r\n 100 – 300<\/td>\r\n 200<\/td>\r\n <\/tr>\r\n
        GRL<\/td>\r\n Methanol\/ xylene<\/td>\r\n 50 – 200<\/td>\r\n 130<\/td>\r\n <\/tr>\r\n
        The above are not product specifications.<\/td>\r\n <\/tr>\r\n<\/table>\r\n\r\n

        [Additional features]<\/p>\r\n

        \r\n
        Varnish of paper laminated circuit<\/dt>\r\n
        Heat and Moisture resistance, Preventing warpage, Electrical insulation<\/dd>\r\n\r\n
        Conductive paint<\/dt>\r\n
        Moisture resistance, Leveling, Anti-forming<\/dd>\r\n\r\n
        Heat resistance paint<\/dt>\r\n
        Heat and Moisture resistance, Leveling<\/dd>\r\n\r\n
        Corrosion resistance adhesive<\/dt>\r\n
        Water and Corrosion resistance<\/dd>\r\n<\/dl>\r\n\r\n

        d. Polyol type<\/h3>\r\n

        This is xylene resin modified by polyol.<\/p>\r\n\r\n\r\n \r\n \r\n \r\n
        Grade<\/td>\r\n Appearance<\/td>\r\n Gardner color<\/td>\r\n Viscosity (mPa\u2022s\/75\u00b0C)<\/td>\r\n OH Value (mgKOH\/g)<\/td>\r\n <\/tr>\r\n
        K-100<\/td>\r\n Clear Liquid<\/td>\r\n \uff1c 4<\/td>\r\n 100 – 500<\/td>\r\n 90<\/td>\r\n <\/tr>\r\n
        The above are not product specifications.<\/td>\r\n <\/tr>\r\n<\/table>\r\n\r\n

        [Additional features]<\/p>\r\n

        \r\n
        Urethane coating<\/dt>\r\n
        Leveling, Corrosion resistance, Anti-forming<\/dd>\r\n\r\n
        Urethane adhesive<\/dt>\r\n
        Initial adhesion, Heat, Corrosion and Alkali resistance <\/dd>\r\n<\/dl>\r\n\r\n

        e. EO additional type<\/h3>\r\n

        This is xylene resin added by ethylene oxide.<\/p>\r\n

        <\/div>\r\n\r\n\r\n \r\n \r\n \r\n
        Grade<\/td>\r\n Appearance<\/td>\r\n Melting Viscosity (mPa\u2022s\/100\u00b0C)<\/td>\r\n OH Value (mgKOH\/g)<\/td>\r\n <\/tr>\r\n
        L5<\/td>\r\n Paste<\/td>\r\n 36<\/td>\r\n 35<\/td>\r\n <\/tr>\r\n
        The above are not product specifications.<\/td>\r\n <\/tr>\r\n<\/table>\r\n\r\n

        [Additional features]<\/p>\r\n

        \r\n
        Rubber compound<\/dt>\r\n
        Flexibility, Damping<\/dd>\r\n\r\n
        Water-based hot melt<\/dt>\r\n
        Adhesion, Water resistance<\/dd>\r\n\r\n
        Water-based coating<\/dt>\r\n
        Adhesion, Water resistance<\/dd>\r\n<\/dl>\r\n \r\n
        \r\n
        Contact Us<\/h5>\r\n

        \r\nMarketing Division \uff0f Performance Resin Department
        \r\nTEL\uff1a+81-45-548-4211\u3000FAX\uff1a+81-45-473-5216
        \r\n<\/p>\r\n

        Contact Us<\/a><\/p>\r\n<\/div>\r\n\r\n<\/section>\r\n","protected":false},"excerpt":{"rendered":"Xylene resin Xylene resin Straight types: Formed by bridged methylene linkage or ether linkage Modified types: Modified by phenols, polyhydric alcohols, or other [Improved features] Control viscosity of various resins (decrease or increase), Good compatibility with various resins Initial adhesion, Tackiness and Stickiness Flexibility Water, Moisture, Alkali, and Gasolin resistance Dielectric property and electric insulation […]","protected":false},"author":1,"featured_media":0,"parent":59,"menu_order":2,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"_lmt_disableupdate":"no","_lmt_disable":"","_locale":"en_US","_original_post":"115","footnotes":""},"class_list":["post-150","page","type-page","status-publish","hentry","en-US"],"acf":[],"_links":{"self":[{"href":"https:\/\/fudow.co.jp\/wp-json\/wp\/v2\/pages\/150","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/fudow.co.jp\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/fudow.co.jp\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/fudow.co.jp\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/fudow.co.jp\/wp-json\/wp\/v2\/comments?post=150"}],"version-history":[{"count":34,"href":"https:\/\/fudow.co.jp\/wp-json\/wp\/v2\/pages\/150\/revisions"}],"predecessor-version":[{"id":1179,"href":"https:\/\/fudow.co.jp\/wp-json\/wp\/v2\/pages\/150\/revisions\/1179"}],"up":[{"embeddable":true,"href":"https:\/\/fudow.co.jp\/wp-json\/wp\/v2\/pages\/59"}],"wp:attachment":[{"href":"https:\/\/fudow.co.jp\/wp-json\/wp\/v2\/media?parent=150"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}